The essentials of the selection of stainless steel plates

The selection of stainless steel plate should consider the operating conditions, such as manual operation or automatic operation, the performance and type of hot press, and the quality requirements for the pressed material such as hardness, gloss, etc. It is also necessary to consider economic accounting, each time a new steel plate is polished, it is required to be able to produce a slow quality of decorative plates.

In addition, when selecting the most reasonable thickness of the steel plate, its service time, quality, and stiffness should be considered, and the strength requirements of the plate when it is compressed should be considered; thermal conductivity; The distribution of pressure, the format of the platen.

 

If the thickness of the steel plate is not enough, it is easy to bend, which will affect the production of decorative plates. If the thickness is too large and the steel plate is too heavy, it will not only increase the cost of the steel plate, but also bring difficulties to the operation. At the same time, it is also necessary to consider the margin that should be left when the stainless steel plate is processed or used. The thickness of the copper plate is not absolutely consistent, but strive to be as consistent as possible in the thickness of the same steel plate, and the thickness tolerance of the general medium-sized saw plate is 0.05-o.15 mm. If the requirements are too strict, the grinding cost will also increase. Generally, it is a steel plate with high tension resistance and hard hardness, the greater the mechanical damage resistance, the longer the durability of use, but the grinding and processing cost is also relatively high.