Welding of stainless steel pipe fittings

Oct 10, 2024

Leave a message

Stainless steel pipe fittings are pipe fittings that insert stainless steel pipes into the socket part of the pipe fitting and then do argon arc welding along the edge of the pipe fitting, which is the most reliable connection method among all connection methods. Inner diameter of pipe fitting socket = outer diameter of pipe. According to the edge welding part of the pipe fitting, it can be further divided into three kinds of pipe fittings: slope edge extension, step edge extension and no extension, and the socket welding specification is generally DN15-DN100.


Butt welded type
Butt welding stainless steel pipe fittings are pipe fittings that make a circle of argon arc welding along the joint of stainless steel pipe and pipe fittings, and generally need to be welded.
Pipe fitting bearing outer diameter = pipe outer diameter.
Butt welding is generally used for welding stainless steel piping systems with larger specifications.

 

22


Press-fit fittings
It has the characteristics of reliable and safe connection, convenient and fast construction, suitable for embedded installation, maintenance-free update, and relatively superior economy.
The working principle of the compression pipe fitting is to insert the thin-walled stainless steel pipe into the socket of the clamping pipe fitting, and use a special clamping tool to clamp the stainless steel pipe in the pipe fitting, and the cross-sectional shape of the clamping place is hexagonal, and there is an O-ring seal between the stainless steel pipe and the pipe fitting, so that it has the characteristics of anti-leakage, anti-pulling, anti-vibration and high pressure resistance. Therefore, it is a relatively advanced connecting part of direct drinking water system, tap water system, heating system, steam system, industrial oil pipe system and industrial gas pipe system. It is suitable for water, oil, gas and other pipeline connections. Manufacturing standard: GB/T 19228.1 2003
Nominal pressure: ≤1.6MPa
Applicable temperature: -20°C ~110°C
Applicable medium: oil, water, gas and other non-corrosive or corrosive media
Material: Stainless steel 304 316L
Piping: Φ15.88~Φ108 stainless steel welded steel pipe


Quick connector
Plugging self-locking circlip fittings
As long as the pipe is inserted into the quick connector, the installation effect of fast flash connection can be achieved, and when dismantling, as long as the supporting light special tool clamps the quick connector afterburner, the pipe can be pulled out and removed.
Fast flash fitting is not only more convenient and fast to install and disassemble, but also has excellent properties such as reusable, non-leakage, shockproof, buffering cold shrinkage and heat expansion, etc., which is a new exploration and breakthrough in pipeline connection mode. It has been widely used and proven in water supply systems at home and abroad, and the pipe fittings are designated by the Water Supplies Department in Hong Kong.


Through the special high-temperature resistant rubber ring, the pipe fitting has been slowly applied and recognized in the water supply and discharge pipelines of solar water heaters, making it more convenient to install and use. It is believed that in the future, there will be more new innovations and breakthroughs in pipeline connection technology, and will continue to develop in the direction of convenience, speed and humanization, and there will be more products for human enjoyment.

 

Send Inquiry