
Titanium Alloys Rod Ti-6Al-4V Grade 5
Alloy Designation: Ti-6Al-4V / 6Al-4V
UNS: R56400
Product Form: Round Rod / Round Bar
Standard: ASTM B348 / B348M, subject to order requirements
Diameter: 6–100 mm, subject to production confirmation
Length: 1,000–6,000 mm, or customized
Surface Finish: Turned, ground, polished or as agreed
Material Condition: Annealed or other agreed condition
Product Introduction
JUDE STEEL supplies Ti-6Al-4V titanium alloy rods, also known as Grade 5 titanium rods or UNS R56400 titanium bars. This alpha-beta titanium alloy combines high strength, low density and good corrosion resistance, making it suitable for demanding engineering and industrial applications.
Our Grade 5 titanium alloy rods are available for industrial and bulk procurement. Buyers can specify the required diameter, length, surface finish, material condition and applicable standard. Customized cutting and dimensional requirements can be reviewed according to the order.
Ti-6Al-4V Titanium Rod Specifications
| Item | Specification |
|---|---|
| Product Name | Ti-6Al-4V Titanium Alloy Rod |
| Material Grade | Grade 5 |
| Alloy Designation | Ti-6Al-4V / 6Al-4V |
| UNS | R56400 |
| Product Form | Round Rod / Round Bar |
| Standard | ASTM B348 / B348M, subject to order requirements |
| Diameter | 6–100 mm, subject to production confirmation |
| Length | 1,000–6,000 mm, or customized |
| Surface Finish | Turned, ground, polished or as agreed |
| Material Condition | Annealed or other agreed condition |
| Inspection | Chemical analysis, mechanical testing and dimensional inspection as specified |
| Certification | Mill Test Certificate (MTC), subject to order agreement |
| Order Type | Wholesale and bulk industrial orders |
Please confirm the available diameter range, length, finish, tolerance and delivery condition with JUDE STEEL before placing an order.
Chemical Composition of Grade 5 Titanium
Ti-6Al-4V is primarily composed of titanium, aluminum and vanadium. Aluminum contributes to alloy strength, while vanadium helps stabilize the beta phase. The chemical limits below are reference values for Grade 5 titanium under ASTM B348. Actual heat analysis should be confirmed against the applicable standard and material test certificate.
| Element | Chemical Composition (wt.%) |
|---|---|
| Titanium (Ti) | Balance |
| Aluminum (Al) | 5.50–6.75 |
| Vanadium (V) | 3.50–4.50 |
| Iron (Fe) | ≤ 0.40 |
| Oxygen (O) | ≤ 0.20 |
| Carbon (C) | ≤ 0.08 |
| Nitrogen (N) | ≤ 0.05 |
| Hydrogen (H) | ≤ 0.015 |
Physical Properties of Ti-6Al-4V
| Property | Typical Value |
|---|---|
| Density | 4.43 g/cm³ |
| Melting Range | Approximately 1,604–1,660°C |
| Elastic Modulus | Approximately 110–115 GPa |
| Thermal Conductivity at 20°C | Approximately 6.7 W/(m·K) |
| Thermal Expansion Coefficient | Approximately 8.6 × 10⁻⁶/K (20–100°C) |
Mechanical Properties of Grade 5 Titanium Rod
For annealed Grade 5 titanium bar under ASTM B348, the following room-temperature minimum properties are commonly specified. Final acceptance should follow the ordered standard, applicable product dimensions and MTC.
| Mechanical Property | Minimum Requirement |
|---|---|
| Tensile Strength | ≥ 895 MPa |
| Yield Strength (0.2% Offset) | ≥ 828 MPa |
| Elongation | ≥ 10% |
| Reduction of Area | ≥ 25% |
Key Advantages of Ti-6Al-4V Titanium Alloy Rod
High Strength-to-Weight Ratio
Ti-6Al-4V provides high mechanical strength at a density of approximately 4.43 g/cm³. It is useful where weight reduction and structural strength are both important.
Corrosion Resistance
The alloy offers good resistance to corrosion in many industrial and marine environments. Suitability should be evaluated against the actual chemical medium, temperature and service conditions.
Good Fatigue Performance
With appropriate material condition, design and processing, Grade 5 titanium can be used in components subject to repeated loading.
Machinability for Precision Components
Ti-6Al-4V rods can be machined into shafts, fasteners, fittings and other engineered parts using suitable tooling and machining parameters.
Applications of Ti-6Al-4V Titanium Alloy Rod
Aerospace Components
Used in structural parts, aircraft fittings, fasteners and selected engine components where strength and weight reduction are important.
Industrial Engineering
Used for high-strength shafts, precision-machined parts, mechanical components and specialized equipment.
Marine and Offshore Equipment
Applied in selected marine components where low weight and corrosion resistance are required. Material suitability depends on the service environment.
Medical and Specialized Equipment
Ti-6Al-4V is used in some medical and specialized engineering products. For implant applications, the buyer should specify the appropriate medical standard and grade, such as ASTM F136 or ISO 5832-3, rather than assuming standard ASTM B348 bar automatically meets implant requirements.
Customized Titanium Rod Supply for Bulk Orders
JUDE STEEL supports inquiries for wholesale Ti-6Al-4V titanium alloy rods. When requesting a quotation, please provide the material grade, required standard, rod diameter, length, quantity, material condition and surface finish.
For customized titanium rod orders, our team can review dimensional requirements, cutting lengths, inspection scope, packaging and shipping arrangements according to the project specification.
Request a Quote for Ti-6Al-4V Titanium Rod
Contact JUDE STEEL for bulk pricing and availability. Please send your required dimensions, quantity and applicable material standard so that we can review your inquiry.
Email: judesteel@juqing.hk
Whatsapp: +86 19033681875
Frequently Asked Questions
1. What is Ti-6Al-4V titanium rod?
Ti-6Al-4V titanium rod is a Grade 5 titanium alloy bar containing approximately 6% aluminum and 4% vanadium. Its UNS designation is R56400.
2. What standard is used for Grade 5 titanium rods?
ASTM B348/B348M is a commonly used specification for titanium and titanium alloy bars and billets. Other standards may apply depending on the intended application and purchase requirements.
3. Can I buy Ti-6Al-4V titanium rods in customized sizes?
Customized diameters and lengths can be discussed according to production capability and order quantity. Please provide your required dimensions and tolerance when requesting a quotation.
4. What affects the price of Ti-6Al-4V titanium rods?
The price depends on diameter, length, order quantity, material condition, surface finish, tolerance, applicable standard and inspection requirements. Contact JUDE STEEL for a quotation based on your specifications.
5. Do you supply wholesale and bulk titanium rods?
JUDE STEEL handles industrial and bulk procurement inquiries. Please provide the required grade, dimensions and estimated quantity for availability and pricing review.
6. Can you provide a material test certificate?
MTC requirements can be confirmed when placing the order. The certificate and inspection scope should match the agreed material specification and purchase requirements.
Our production strength

Factory live shots

production workshop

Steel plate production line

Steel coil production line

Steel coil production line

Steel coil production line

Cold rolling workshop

Steel coil production line
Hot Tags: Titanium Alloys Rod Ti-6Al-4V Grade 5, China Titanium Alloys Rod Ti-6Al-4V Grade 5 manufacturers, suppliers, factory, High Strength Titanium Tube, Hot Rolled Titanium Coil
You Might Also Like
Send Inquiry
