ASTM B348 Grade 5 Ti-6Al-4V Titanium Alloy Rod

 

ASTM B348 Grade 5 Ti-6Al-4V Titanium Alloy Rod is a high-strength titanium alloy round rod supplied for industrial and engineering applications requiring low density, high strength and good corrosion resistance. Also identified as UNS R56400, Grade 5 titanium is one of the most widely used Ti-6Al-4V alloys for demanding applications.
Jude Steel supplies Grade 5 titanium alloy rods with diameters from 5–10 mm and standard lengths from 1000–3000 mm. The rods can be supplied with bright, machined or polished surfaces depending on the application and customer requirements.

The material is available according to ASTM B348 requirements, with chemical composition, mechanical properties and dimensional inspection available for applicable orders. Cut-to-length processing, MTC documentation and third-party inspection can also be arranged for bulk industrial procurement.
 

 

Parameter	Specification
Product	Titanium Alloy Rod
Grade	Grade 5 / Ti-6Al-4V
UNS	R56400
Standard	ASTM B348
Diameter	5–10 mm
Length	1000–3000 mm
Shape	Round
Manufacturing	Cold Drawn / Hot Rolled
Surface	Bright / Machined / Polished
Condition	Annealed / As Specified
Dimensional Tolerance	According to ASTM B348 or customer requirements
Cutting	Cut-to-Length Available
Inspection	Chemical, Mechanical, Dimensional & Surface Inspection
Certification	Mill Test Certificate (MTC) Available

 

Element	Composition, wt.%
Titanium (Ti)	Balance
Aluminum (Al)	5.50–6.75
Vanadium (V)	3.50–4.50
Iron (Fe)	≤ 0.40
Oxygen (O)	≤ 0.20
Carbon (C)	≤ 0.08
Nitrogen (N)	≤ 0.05
Hydrogen (H)	≤ 0.015
Yttrium (Y)	≤ 0.005
Other Elements, each	≤ 0.10
Other Elements, total	≤ 0.30

 

 

Property	Requirement / Typical Value
Tensile Strength	≥895 MPa
Yield Strength (0.2% Offset)	≥825 MPa
Elongation	≥10%
Reduction of Area	≥25%
Hardness	Typically 30–36 HRC
Elastic Modulus	Approx. 114 GPa

 

Property	Typical Value
Density	4.43 g/cm³
Melting Range	1604–1660°C
Elastic Modulus	114 GPa
Thermal Conductivity	6.7 W/m·K
Specific Heat Capacity	0.526 J/g·K
Electrical Resistivity	Approx. 1.78 μΩ·m
Coefficient of Thermal Expansion	Approx. 8.6 × 10⁻⁶ /K
Magnetic Property	Non-magnetic

 

ASTM B348 Grade 5 Ti-6Al-4V titanium alloy rods can be supplied with different surface conditions according to the manufacturing process, diameter and application requirements.

Surface Finish	Description
Bright Finish	Smooth, clean surface suitable for applications requiring a bright appearance
Machined	Machined surface with controlled dimensions and improved surface consistency
Polished	Smoother surface produced by mechanical polishing
Pickled	Surface treated to remove oxide scale and processing residues
As Supplied	Standard mill or processed surface according to the agreed specification

 

Grade 5 Ti-6Al-4V titanium alloy rods are manufactured through controlled forming and finishing processes according to the required diameter, material condition and applicable specification. 
Typical manufacturing route:

For smaller-diameter rods, cold drawing or additional machining may be used to achieve the required dimensional accuracy and surface condition. Each production route is selected according to the required size, tolerance and final application.

Before shipment, the rods can be checked for chemical composition, mechanical properties, diameter, length, straightness and surface quality according to the agreed inspection requirements.

 

 

 

Grade 5 Ti-6Al-4V titanium alloy rods can be supplied in an annealed or other agreed material condition depending on the applicable specification and customer requirements.

Heat treatment is used to control the material's mechanical properties and dimensional stability after forming. The final properties can be affected by the rod diameter, processing route, heat-treatment parameters and cooling conditions.

Supply Condition	Description
Annealed	Common supply condition for balancing strength and ductility
As Specified	Supplied according to the customer's required material condition
Heat Treated	Heat treatment controlled according to the applicable specification

 

 

Grade 5 and Grade 2 are both commercially important titanium materials, but they are selected for different engineering requirements.

Property	Grade 2 Titanium Rod	Grade 5 Ti-6Al-4V Titanium Rod
Material Type	Commercially Pure Titanium	Alpha-Beta Titanium Alloy
Main Alloying Elements	Mainly Titanium	Aluminum + Vanadium
Strength	Moderate	High
Density	Approx. 4.51 g/cm³	Approx. 4.43 g/cm³
Strength-to-Weight Ratio	Good	Excellent
Corrosion Resistance	Excellent	Excellent
Formability	Relatively Good	More Limited
Machinability	Relatively Good	Requires controlled machining
Typical Applications	Chemical Processing, Marine, Heat Exchangers	Aerospace, Machinery, Marine, Engineering Components

ASTM B348 Grade 5 Ti-6Al-4V titanium alloy rods are used for machined and fabricated components where high strength, low density and corrosion resistance are required. The rod form is particularly suitable for turning, CNC machining, cutting and fabrication into finished engineering parts.

      Aerospace Components: Shafts, pins, brackets and other lightweight structural or machined components.

      Industrial Machinery: High-strength shafts, bushings, pins and machine components.

      Marine Equipment: Corrosion-resistant fasteners, shafts and mechanical components.

      Chemical Equipment: Components exposed to corrosive process environments.

     Fasteners: Bolts, studs, screws and other titanium alloy fastener components.
      Machined Components: CNC-turned parts, precision pins, shafts and custom components.
      Engineering Parts: Custom mechanical components requiring a high strength-to-weight ratio.
       Oil & Gas Equipment: Selected components used in demanding environments where corrosion resistance and low weight are required.
 

Quality inspection is an important part of Grade 5 titanium rod procurement, particularly for aerospace, machinery, marine and other industrial applications.

Depending on the order requirements, Jude Steel can arrange:

Chemical Composition Testing – Verification of alloying elements against the applicable specification.

Mechanical Testing – Tensile strength, yield strength and elongation testing.

Dimensional Inspection – Diameter, length, straightness and dimensional tolerance checks.

Surface Inspection – Visual inspection and surface condition verification.

PMI Testing – Material identification to verify the supplied alloy.

Mill Test Certificate (MTC) – Material and test documentation for the applicable production batch.

Third-Party Inspection – Independent inspection can be coordinated according to agreed inspection requirements.
 

Grade 5 Ti-6Al-4V titanium alloy rods are packed according to their diameter, length, surface condition and transportation requirements.

Typical export packaging may include:

Protective wrapping to help prevent surface damage

Bundling for convenient handling and loading

Plastic or other protective materials where required

Wooden cases for selected orders

Export-standard packaging

Loading protection to reduce movement and impact during transportation
 

Jude Steel supplies ASTM B348 Grade 5 Ti-6Al-4V titanium alloy rods for bulk industrial and engineering applications.

Our supply and processing capabilities include:

ASTM B348 Grade 5 Ti-6Al-4V

UNS R56400

Diameter: 5–10 mm

Length: 1000–3000 mm

Cut-to-size service

Custom processing according to requirements

MTC documentation

Chemical and mechanical testing

Dimensional and surface inspection

PMI testing upon request

Third-party inspection coordination

Export packaging

Support for bulk industrial orders

For quotation, customers can provide the required diameter, length, quantity, standard, surface condition, tolerance and inspection requirements.

 

Looking for ASTM B348 Grade 5 Ti-6Al-4V Titanium Alloy Rod for an industrial project? Jude Steel supplies Grade 5 titanium rods with 5–10 mm diameters and 1000–3000 mm lengths, with cut-to-length processing and inspection services available according to order requirements.

For a quotation, please provide:

Titanium grade and standard

Diameter and length

Required quantity

Surface finish

Dimensional tolerance

Inspection and certification requirements

Delivery destination

Hot Tags: ASTM B348 Grade 5 Ti-6Al-4V Titanium Alloy Rod, China ASTM B348 Grade 5 Ti-6Al-4V Titanium Alloy Rod manufacturers, suppliers, factory, High Strength Titanium Tube, Hot Rolled Titanium Coil