Four main functions of phosphating of square tubes

Jun 03, 2025

Leave a message

Phosphating is a common method for metal surface treatment of square tubes. The following will introduce the four main functions of phosphating of square tubes:

 

Square tube supply wholesale

 

1. Decoration

 

After phosphating, a layer of phosphating film is formed on the surface of the square tube, isolating air, oxygen, etc., and sealing the pores of the phosphating film, which has a good anti-corrosion effect. Commonly used decorative phosphating are manganese, zinc, zinc-calcium, and zinc-manganese. Among them, the manganese phosphating film has the darkest color, which is black-gray, and the zinc color is the lightest, which is gray. For decorative phosphating, manganese phosphating is preferred. Due to the stability of manganese phosphate, its anti-corrosion ability is much better than zinc phosphating. At the same time, manganese phosphating has a dark color, hemispherical particle crystals, and a delicate feel. In addition, the wear resistance of manganese phosphating film is greater than that of zinc phosphating, which is suitable for situations with higher wear resistance requirements.

 

2. Anti-corrosion and anti-rust

 

It is mainly manganese phosphating. The structure of the manganese phosphating film is spherical, granular crystals. The film layer has good density, and the appearance is gray-black to black. The purpose is to improve the wear resistance and corrosion resistance of square tubes, so it is also the best among all phosphating methods in terms of anti-rust effect. However, its coating adhesion is slightly poor, so it is rarely used in pre-coating treatment. The film layer of manganese phosphating film is relatively hard, and this method cannot be used for extrusion treatment.

 

3. Coating primer

 

Since metal is a polar substance, and paint is an organic polymer compound, which is non-polar, if the paint is directly applied on the surface of the square tube, the combination is not strong, and the paint is easy to peel off. Phosphating before painting can solve this problem. This is because the phosphate reacts with the surface during phosphating, and the phosphate is firmly deposited on the surface of the pipe. At the same time, because the phosphate film has tiny pores, when spraying paint, the paint polymer penetrates the pores of the phosphate film, which increases the adhesion of the paint and makes the paint less likely to peel off, thereby increasing the anti-corrosion time. The phosphating of square tubes is generally zinc or zinc-calcium phosphating, and good results can be obtained by using excellent room temperature phosphating.

 

4. Lubrication

 

Because the phosphate film has tiny micropores, it can store saponified liquid and play a lubricating role, preventing it from sticking to the mold surface during the cold extrusion of square tubes and damaging the equipment.

 

The above are the main functions of square tube phosphating, I hope you like it.

Send Inquiry