What is the forming process of straight seam welded steel pipe?
Jul 01, 2025
Leave a message
What is the forming process of straight seam welded steel pipe? Straight seam welded steel pipe is a steel pipe made of hot-rolled or cold-rolled steel plate or steel strip coiled and welded on welding equipment. The pipe is called a straight seam welded pipe. Regardless of which straight seam steel pipe welding process is used, the main steps are similar.

1. Plate inspection: After the steel plate used to manufacture large-diameter submerged arc welded straight seam steel pipe enters the production line, the whole plate is first subjected to ultrasonic inspection;
2. Edge milling: The two edges of the steel plate are double-sided milled by the edge milling machine to achieve the required plate width, plate edge parallelism, and groove shape;
3. Pre-bending: The plate edge is pre-bent by the pre-bending machine to give the plate edge the required curvature.
4. Forming: On the JCO forming machine, first half of the pre-bent steel plate is pressed into a "J" shape through multiple step punching, and then the other half of the steel plate is bent in the same way to form a "C" shape, and finally an open "O" shape is formed
5. Pre-welding: The formed straight seam welded steel pipe is seam-welded and continuously welded by gas shielded welding (MAG);
6. Internal welding: The inner side of the straight seam steel pipe is welded by longitudinal multi-wire submerged arc welding (up to four wires);
7. External welding: longitudinal multi-wire submerged arc welding is used to weld on the outside of the straight seam submerged arc welded steel pipe;
8. Ultrasonic inspection I: 100% inspection of the internal and external welds of the straight seam welded steel pipe and the parent materials on both sides of the weld;
9. X-ray inspection I: 100% X-ray industrial television inspection of the internal and external welds, using an image processing system to ensure the sensitivity of flaw detection;
10. Diameter expansion: The diameter of the submerged arc welded straight seam steel pipe is expanded over the entire length to improve the dimensional accuracy of the steel pipe and improve the distribution of stress in the steel pipe.
11. Hydrostatic test: The expanded steel pipes are inspected one by one on a hydrostatic test machine to ensure that the steel pipes meet the test pressure required by the standard. The machine has automatic recording and storage functions.
12. Chamfering: The steel pipes that have passed the inspection are processed at the pipe end to achieve the required pipe end groove size.
13. Ultrasonic inspection II: Ultrasonic inspection is performed again on each pipe to check for possible defects after expansion and water pressure test of straight seam welded steel pipes;
14. X-ray inspection II: X-ray industrial television inspection and pipe end weld filming are performed on the steel pipes after expansion and water pressure testing.
15. Magnetic particle inspection of pipe ends: This inspection is performed to find defects at the pipe ends.
16. Anti-corrosion and coating: qualified steel pipes are anti-corrosion and coated according to user requirements.
The above is about the forming process of straight seam welded steel pipes. If you have any questions, please feel free to contact us.
Mob: +86-13772502581
Email: judesteel@juqing.hk
Send Inquiry
