Mechanical Properties of S44660

Jul 30, 2025

Leave a message

S44660 ferritic stainless steel, with a chromium content of at least 12% and a self-passivating film, combines acid resistance, non-magnetic properties, and excellent weldability. It is widely used in chemical pipelines, ship containers, and building structures, but requires precise heat treatment to avoid a loss of toughness.

 

UNS S44660 pipe supplier

 

Introduction to S44660

 

S44660 is a non-standard ferritic stainless steel from the United States. Its UNS designation is S44660 ferritic stainless steel, also known as Seacure/Sc-1 stainless steel.

This corrosion-resistant steel contains at least 12% chromium and is a type of stainless and acid-resistant steel. The chromium in the steel reacts with oxygen in the corrosive medium to form a thin oxide film (a self-passivating film) on the steel's surface, imparting excellent corrosion resistance in air, water, acids, alkalis, and salts. In addition to chromium, alloying elements such as nickel, molybdenum, copper, and titanium may be added to the steel to enhance corrosion resistance, processability, and mechanical properties. Its composition standard requires (Ti + Nb) to be 0.2-1.0, with (Ti + Nb) ≥ 6 (C + N). (Titanium + Niobium) Ti + Nb must also meet ≥ 0.2 + 4 (%C + %N).

 

Mechanical Properties

 

This type of steel exhibits excellent ductility, toughness, weldability, corrosion resistance, and is non-magnetic or weakly magnetic. After quenching and tempering, S44660 ferritic stainless steel exhibits high tensile strength and hardness.

 

However, some problems may arise during heat treatment. Overheating can lead to an increase in retained martensite in the microstructure, reduced dimensional stability, coarsening of the steel grains, and reduced component toughness, impact resistance, and bearing life. In severe cases, heat treatment cracking can occur. Underheating can result in the formation of excessive troostite in the microstructure, reducing hardness and wear resistance, significantly impacting material life. Heat treatment cracking, heat treatment deformation, surface decarburization, and soft spots can also occur.

 

Corrosion Resistance

 

S44660 ferritic stainless steel exhibits excellent corrosion resistance in both oxidizing and reducing media, thanks to the self-passivating film formed on its surface and the combined effects of added alloying elements, making it resistant to a wide range of corrosive media.

 

Applications

 

It is used to manufacture acid-resistant equipment, such as corrosion-resistant containers and equipment linings, pipelines, and acid-resistant equipment parts. It is widely used in the petroleum, chemical, and fertilizer industries.

 

In the construction/building industry, it can be used for cladding, guardrails, door and window accessories, street furniture, structural profiles, rebar, lighting poles, plaques, diamond supports, and more.

 

In the transportation industry, it is used in exhaust systems, automotive trim/grilles, road tankers, ship containers, chemical tankers, and sanitation trucks.

 

In the oil and gas industry, S44660 ferritic stainless steel is used for bridges and offshore pipelines.

 

Mob: +86-13772502581
Email: Judesteel@Juqing.Hk

Send Inquiry