Mirror Finish Stainless Steel Sheet
Surface Finish: No.8 Mirror / 2P Polished
Cold Rolled Thickness: 0.3–3.0mm
Hot Rolled Thickness: 3–20mm
Common Width: 1000mm, 1219mm, 1250mm, 1500mm
Common Length: 2000mm, 2438mm, 2500mm, 3000mm
Material Standard: ASTM A240/A240M, according to grade
Surface Reference: ASTM A480/A480M No.8 / EN 10088-2 2P
Protection: PVC or PE film, subject to requirements
Product Introduction
Mirror Finish Stainless Steel Sheet is a decorative stainless steel material processed through mechanical polishing and buffing to create a smooth, highly reflective surface. Its bright appearance makes it suitable for projects where both material performance and visual presentation are important.
JUDE STEEL supplies mirror polished stainless steel sheets in different grades, thicknesses and dimensions for architectural decoration, elevator interiors, commercial spaces, furniture manufacturing and industrial fabrication.
Available material options include 201, 304, 304L, 316, 316L, 317 and 317L stainless steel, subject to availability. Customers can specify No.8 mirror finish or 2P polished surface requirements according to the applicable standard and project expectations.
Whether you are sourcing 304 mirror finish stainless steel sheet for interior decoration or 316L mirror stainless steel sheet for a more demanding environment, material selection and surface quality should be confirmed before ordering.
Product Specifications at a Glance
| Parameter | Details |
|---|---|
| Product | Mirror Finish Stainless Steel Sheet |
| Material | 201, 304, 304L, 316, 316L, 317, 317L |
| Surface Finish | No.8 Mirror / 2P Polished |
| Cold Rolled Thickness | 0.3–3.0mm |
| Hot Rolled Thickness | 3–20mm |
| Common Width | 1000mm, 1219mm, 1250mm, 1500mm |
| Common Length | 2000mm, 2438mm, 2500mm, 3000mm |
| Material Standard | ASTM A240/A240M, according to grade |
| Surface Reference | ASTM A480/A480M No.8 / EN 10088-2 2P |
| Protection | PVC or PE film, subject to requirements |
| Edge | Mill Edge / Cut Edge |
| Inspection | Surface and dimensional inspection |
| Documentation | EN 10204 3.1 MTC, subject to agreement |
Surface Finish: A Reflective Appearance for Decorative Applications
The surface finish is one of the most important factors when selecting mirror stainless steel sheet. It affects reflectivity, visual consistency and the final appearance of fabricated products.
No.8 Mirror Finish
No.8 is a highly reflective polished stainless steel finish produced through fine mechanical polishing and buffing. It creates a mirror-like surface that reflects surrounding objects and light.
Typical applications include elevator panels, decorative wall cladding, retail displays, furniture components and architectural interiors.
2P Polished Surface
The 2P finish under EN 10088-2 refers to a mechanically bright-polished surface. It can provide a reflective appearance suitable for decorative applications.
When specifying a 2P stainless steel sheet or No.8 mirror finish stainless steel sheet, buyers should confirm the required appearance, inspection criteria and applicable standard. These finish designations should not automatically be treated as identical in every purchase specification.
Select the Right Stainless Steel Grade
Different stainless steel grades offer different corrosion resistance, fabrication characteristics and cost considerations. The correct grade should be selected according to the installation environment.
| Grade | Material Characteristics | Typical Applications |
|---|---|---|
| 201 | Economical option for suitable indoor decorative environments | Interior panels, furniture, decorative trim |
| 304 | General corrosion resistance and good fabrication properties | Elevators, kitchens, architectural decoration |
| 304L | Low-carbon version of 304 | Fabricated and welded decorative components |
| 316 | Molybdenum-bearing grade with improved pitting resistance | Marine-related and selected industrial environments |
| 316L | Low-carbon version of 316 | Welded equipment, chemical and architectural applications |
| 317 / 317L | Higher alloy grades for selected demanding environments | Specialized industrial applications |
201 Mirror Finish Stainless Steel Sheet
201 mirror finish stainless steel sheet is commonly considered for decorative projects where appearance and material cost are important. It can be used for indoor decorative panels, furniture trim and selected architectural components.
Its corrosion resistance is generally lower than 304 and 316 grades, so it should be selected according to the actual service environment.
304 Mirror Finish Stainless Steel Sheet
304 mirror finish stainless steel sheet is widely used in commercial interiors, elevator decoration, kitchen equipment and architectural projects. It combines a reflective appearance with general corrosion resistance and good formability.
316L Mirror Finish Stainless Steel Sheet
316L mirror finish stainless steel sheet contains molybdenum and has a lower carbon content than standard 316. It is often specified for applications requiring improved resistance to pitting and crevice corrosion, particularly in suitable chloride-containing environments.
Dimensions and Custom Processing Options
Mirror stainless steel sheet can be selected according to the required thickness, width, length and surface treatment.
Common inquiry dimensions include:
| Thickness | Width | Length |
|---|---|---|
| 0.5mm | 1000mm / 1219mm | 2000mm / 2438mm |
| 0.8mm | 1000mm / 1219mm | 2000mm / 2438mm |
| 1.0mm | 1000mm / 1219mm | 2000mm / 2438mm |
| 1.2mm | 1000mm / 1219mm | 2000mm / 2438mm |
| 1.5mm | 1000mm / 1219mm / 1500mm | 2438mm / 3000mm |
| 2.0mm | 1000mm / 1219mm / 1500mm | 2438mm / 3000mm |
| 3.0mm | 1000mm / 1219mm / 1500mm | 2438mm / 3000mm |
These are indicative dimension combinations for quotation inquiries, not confirmed stock specifications. Please confirm the actual dimensions and processing availability before placing an order.
Additional requirements can include:
One-side or two-side mirror polishing
PVC or PE protective film
Cut-to-size sheet dimensions
Specified edge condition
Surface appearance requirements
Material grade and thickness tolerances
For customized mirror finish stainless steel sheet, technical drawings or detailed specifications can help clarify the required processing.
Where Is Mirror Stainless Steel Sheet Used?
Architectural decoration:It can be used for curtain walls, ceilings, elevator cars, stair handrails and other parts of buildings to add a sense of modernity and beauty to the building.
Furniture manufacturing: It is used to make furniture countertops, cabinet doors, handles and other parts, such as kitchen cabinets, bathroom cabinets, coffee tables, etc., to improve the quality and appearance of furniture.
Commercial display: It is used for display racks, display cabinets, decorative walls, etc. in shopping malls, exhibition halls, museums and other places to create a high-end and fashionable display atmosphere.
Elevator industry: The inner wall of the elevator car, door panels and other parts often use mirror stainless steel plates, which are not only beautiful, but also easy to clean and maintain.
Kitchenware manufacturing: such as sinks, stove panels, range hood shells, etc. in the kitchen, taking advantage of its corrosion resistance and easy cleaning.
Medical equipment: They are also used in the shells and work surfaces of some medical equipment because they are hygienic, easy to clean and can meet certain strength requirements.
Electronic equipment: Mirror Finish Stainless Steel Sheet can be used for the shells and parts of electronic products such as mobile phones, computers, and tablets, providing beautiful appearance and certain protection.
Features
High gloss: Mirror Finish Stainless Steel Sheet has extremely high reflectivity, the surface is as bright as a mirror, and can clearly reflect the image of the object. It can be used in building decoration, furniture, elevators and other fields to enhance the brightness and beauty of the space.
Good corrosion resistance: Inheriting the corrosion resistance of stainless steel, it is not easy to rust or corrode in various environments. It is suitable for a variety of indoor and outdoor environments, such as building exterior walls, interior decoration, chemical equipment, etc.
High strength and hardness: It has high strength and hardness, can withstand certain pressure, impact and wear, and can be used to manufacture products that require material strength, such as mechanical parts, kitchen utensils, etc.
Easy to clean and maintain: The surface is smooth and flat, not easy to be contaminated with dust and dirt, and easy to clean. Just wipe it with a wet cloth to keep the surface clean and tidy, saving time and cost for cleaning and maintenance.
Processability: Although it has a certain strength, it can still be processed by cutting, bending, stamping and other processing methods. The Mirror Finish Stainless Steel Sheetl can be made into products of various shapes and sizes to meet the needs of different application scenarios.
Mirror Polished Stainless Steel Sheets Sorted by Thickness
Classification by thickness:
-
Thin plate:
The thickness is thinner, generally below 0.5mm, and is often used in occasions with strict requirements on material thickness, such as electronic equipment, precision instruments and other shells.
-
Medium plate:
The thickness is between 0.5mm - 3mm, and it is widely used, such as walls, ceilings in architectural decoration, and panels of furniture.
-
Thick plate:
The thickness is about 3mm - 20mm, and it can be used for structural parts with high strength and bearing capacity requirements, such as bridges, building support structures, etc.
-
Extra thick plate:
The thickness is greater than 20mm, usually used for special heavy equipment, large-scale projects, etc.
How Mirror Finish Stainless Steel Sheet Is Processed
The final appearance of a mirror stainless steel sheet depends on the base material condition and the polishing process.
Surface Preparation
The base stainless steel sheet is checked and prepared before polishing. Initial surface defects can affect the final reflective appearance.
Grinding and Polishing
Mechanical grinding removes surface irregularities. Progressively finer abrasives are then used to improve surface smoothness and reflectivity.
Buffing
Buffing is used to achieve a bright, reflective finish. The final surface appearance should be checked against the agreed sample or acceptance criteria.
Protective Film Application
A protective PVC or PE film can be applied when specified. This helps reduce the risk of scratches during handling, fabrication and transportation.
Final Inspection
Surface appearance, dimensions, thickness and material documentation can be checked according to the agreed order requirements.
Buying Mirror Finish Stainless Steel Sheet: What Should You Confirm?
When you buy mirror finish stainless steel sheet for an industrial or decorative project, providing complete specifications helps avoid misunderstandings and quotation delays.
Before requesting a price, confirm:
Material grade: 201, 304, 304L, 316 or 316L.
Thickness: Required sheet thickness in millimeters.
Dimensions: Width and length of each sheet.
Surface finish: No.8 mirror or 2P polished finish.
Protection: Whether PVC or PE protective film is required.
Quantity: Number of sheets or total order weight.
Documentation: Required material certificate and inspection documents.
Delivery: Destination port and preferred shipping arrangements.
Providing these details allows suppliers to evaluate the material and processing requirements more accurately.
Mirror Finish Stainless Steel Sheet Price and Wholesale Supply
The price of mirror finish stainless steel sheet is influenced by more than the base stainless steel price. Polishing requirements and material specifications also affect the final quotation.
The main pricing factors include:
Stainless steel grade and raw material market price
Sheet thickness, width and length
No.8 or 2P surface processing requirements
One-side or two-side polishing
Protective film and packaging
Order quantity and delivery destination
For wholesale mirror finish stainless steel sheet or bulk procurement, buyers should provide a complete specification and estimated quantity.
JUDE STEEL reviews inquiries for different stainless steel grades and dimensions. Customized requirements can be evaluated according to processing arrangements and actual supply availability.
Packaging and Quality Documentation
Mirror finish stainless steel sheet requires suitable protection because scratches and surface damage can affect its decorative appearance.
Depending on the order requirements, export packaging may include:
Protective film on the polished surface
Interleaving or protective wrapping
Waterproof packaging
Wooden cases or export pallets
Product labels and identification marks
Material certificates and inspection documentation can be arranged according to the purchase agreement. EN 10204 3.1 MTC can be specified when required and agreed before order placement.
JUDE STEEL – Stainless Steel Sheet Supplier for Bulk Projects
JUDE STEEL has supplied steel raw materials for industrial and bulk procurement projects since 2008. Our product range includes stainless steel sheets, plates, coils, pipes, tubes, bars and related steel products.
For customers sourcing mirror finish stainless steel sheets from China, we support material specification review, grade selection, dimension confirmation and export order coordination.
Whether your requirement is 304 mirror finish stainless steel sheet for elevator decoration or 316L mirror stainless steel sheet for a specialized project, our team can review your technical requirements and confirm suitable supply options.
Frequently Asked Questions
Q1: What is the difference between mirror finish and regular stainless steel sheet?
A1: Regular stainless steel sheet may have a mill, brushed or matte surface. Mirror finish stainless steel sheet undergoes additional mechanical polishing and buffing to achieve a highly reflective appearance.
Q2: Is No.8 the same as a mirror finish?
A2: No.8 is a commonly used designation for a mirror finish under ASTM A480/A480M. It describes a highly reflective polished surface. The required appearance should still be agreed with the supplier.
Q3: Is 2P stainless steel sheet a mirror finish?
A3: EN 10088-2 2P describes a mechanically bright-polished surface. It can provide a mirror-like appearance, but the exact appearance and acceptance criteria should be specified for the order.
Q4: Which is better, 316L or 304 mirror finish stainless steel sheet?
A4: The choice depends on the service environment and project requirements. 304 is widely used for general decorative applications, while 316L offers improved resistance to pitting and crevice corrosion in many environments.
Q5: Can mirror finish stainless steel sheets be supplied with protective film?
A5: PVC or PE protective film can be specified to help protect the polished surface during handling and transportation. The film type and application should be confirmed when ordering.
Q6: Can I order customized mirror finish stainless steel sheets?
A6: Customized thicknesses, widths, lengths and surface requirements can be reviewed according to the project specification and supply availability.
Q7: How do I get a quotation from a China mirror stainless steel sheet supplier?
A7: Please send the required material grade, thickness, width, length, surface finish, quantity and destination. JUDE STEEL can review the specifications and provide a quotation based on confirmed supply arrangements.
Need mirror finish stainless steel sheet for your next project?
Send JUDE STEEL your required grade, dimensions, surface finish and estimated quantity. Our team will review your inquiry for industrial and bulk procurement.
Our address:
Room 1704, Unit 1, Jinqiao International Building, Xixian New District, Xi'an, Shaanxi Province, China
Phone Number/WhatsApp:
+86 19033681875
E-mail:
judesteel@juqing.hk

Hot Tags: mirror finish stainless steel sheet, China mirror finish stainless steel sheet manufacturers, suppliers, factory, Corrosion resistant stainless steel plate, 321 stainless steel plate, 304 stainless steel plate, 316 Stainless Steel Plate, Hairline Finish Stainless Steel Sheet, Hot rolled stainless steel plate
You Might Also Like
Send Inquiry

