-
![6061-T651 Aluminum Plate ASTM B209]()
6061-T651 Aluminum Plate ASTM B209🔹 Thickness: 0.25 to 6 (6mm to 150mm). 🔹 Width: Up to 72 (1828mm). 🔹 Length: Up to 240 (6096mm). 🔹 Surface Finish: Mill finish, anodized, powder-coated. 🔹 Certifications: Mill Test Reports
-
![Hot Rolled Aluminum Strip]()
Hot Rolled Aluminum StripWe are an industrial manufacturer of hot rolled aluminum strip products, supplying global OEM and industrial manufacturing companies that require high consistency, controlled process stability, and
-
![1060 Aluminum Coil]()
1060 Aluminum Coil1060 Aluminum Coil is a commercially pure aluminum alloy with a minimum aluminum content of ≥99.6%, belonging to the 1xxx series aluminum family.
-
![Hot Rolled Aluminum Plate]()
Hot Rolled Aluminum PlateHot Rolled Aluminum Plate is a structural aluminum material produced through controlled hot rolling and homogenization processes. It is designed for industrial applications requiring stable
-
![Cold Rolled Aluminum Sheet]()
Cold Rolled Aluminum SheetCold Rolled Aluminum Sheet is manufactured through multi-pass cold rolling at room temperature followed by controlled annealing, resulting in high dimensional precision, stable mechanical
-
![T6 Temper Aluminum Plate]()
T6 Temper Aluminum PlateWe are a professional aluminum plate manufacturer specializing in T6 heat-treated aluminum alloys (6061, 6082, 7075) for global OEM manufacturing and industrial engineering applications.
-
![5005 Aluminum Sheet]()
5005 Aluminum Sheet5005 Aluminum Sheet is a non-heat-treatable Al-Mg alloy (5xxx series) designed for applications requiring excellent anodizing performance, stable corrosion resistance, and consistent fabrication
-
![1060 Aluminum Sheet]()
1060 Aluminum Sheet1060 aluminum sheet is a commercially pure aluminum material with aluminum content of ≥99.6%, manufactured in accordance with GB/T 3880 and ASTM B209 standards.
-
![1050 Aluminum Sheet]()
1050 Aluminum Sheet1050 aluminum sheet is a commercially pure aluminum product with a minimum aluminum content of 99.5%. It is widely used in applications requiring corrosion resistance, good formability, and stable
-
![ASTM B209 7075-T651 Aluminum Plate Aerospace Grade]()
ASTM B209 7075-T651 Aluminum Plate Aerospace GradeStandard: ASTM B209. Grade: 7075. Thickness: 6–150 MmLength: 2000–6000 MmWidth: 1000–2500 MmSurface: Mill Finish
-
![ASTM B209 Aluminum Plate]()
ASTM B209 Aluminum PlateStandard：ASTM B209. Common Grade:5052,5054,5083,5086,6061,7075. Width:1000mm-3000mm Standard or customized. Thickness:0.5mm-250mm. Surface:Mill Finish / Customized
-
![3003 Aluminum Alloy]()
3003 Aluminum AlloyAvailable Product Forms & Sizes. 🔹 Sheets & Plates (0.2mm - 6mm thickness). 🔹 Coils & Strips (custom widths available). 🔹 Tubes & Pipes (seamless & welded options). 🔹 Rods & Bars (round, square,
Cleo Tucker
Travis Boggess
Denise Linde
Donna Fike
Shannon Windsor
Max Montiel
Web23 hours ago · The density of 3003 aluminum is 2.73 g/cm 3 (0.0986 lb/in 3 ), which is around the same as pure aluminum, and it does not respond to the heat treatment process. Instead, this alloy...
WebMay 25, 2022 · 3003 aluminum is alloyed with 1.2% manganese. While more malleable and formable than 5052 aluminum, it is not as strong (tensile strength 17 to 30 KSI vs. 31 to 41 KSI). Due to the...
WebAluminum alloy 3003 contains about 1.25% manganese and 0.1% copper, which increase the strength approximately 20% above the 1000 series aluminum grades. This is the...
WebTechnical Data Sheet. Aluminum Alloy 3003 is a commercially pure aluminum with the addition of manganese. Alloy 3003 is the most widely used aluminum alloy due to it's...
WebIncludes 3002, 3003, 3004, 3105 and others. 3003 is one of the most commonly used aluminum alloys. The main alloying ingredient is Manganese, which gives it greater...
Web3003 aluminum is a general purpose alloy that demonstrates moderate strength, good formability, workability, and can be easily drawn. It shows about 20% greater strength than 1100 aluminum and its...