What Are The Connection Methods Of Stainless Steel Pipe Fittings

Sep 10, 2024

Leave a message

There are many connection methods for stainless steel pipe fittings, and the mainstream ones are compression connection, ring pressure connection, flange connection, groove connection, welded connection and taper thread connection. Each of them has its own advantages and disadvantages, and it is necessary to find the right way to do it in the real situation.

 

1. Press-on connection

The connection principle of this method is to use hydraulic tongs to clamp the stainless steel pipe fittings on the pipe, and at the same time use the O-ring to achieve the water-stopping effect, so as to have the connection effect. Although this method is easy to operate, the pipe wall is very thin, the connection strength is as low as only about one-third of the pipe body, and the pipe cannot be disassembled.

 

2. Ring pressure connection

The principle of ring pressure connection is to use hydraulic tongs to clamp the stainless steel pipe fittings on the pipe, and use a wide belt rubber sealing ring to stop water, so as to achieve a good connection effect. Because this method has one more pressure pit than the clamping type, the connection strength is slightly stronger than that of the clamping type, and the pressure pit is easy to rotate because the pressure pit is a ring type, which will affect the overall sealing effect.

 

3. Flange connection

The principle of flange connection is to use tightening bolts to connect the two connecting parts with flange sheets, and then seal the plane seal to achieve the corresponding connection effect. Its advantages are that the connection strength is high-quality and stable, easy to install and detachable, but the disadvantage is that the cost of the flange is relatively high.

 

Send Inquiry