-
![Aluminum Square Tube Stock]()
Aluminum Square Tube StockGet A Free Quote Today!. 🔹 Competitive pricing – factory direct. 🔹 Custom sizes & alloys available. 🔹 Fast lead times & reliable shipping. 🔹 Technical support for material selection
-
![Precision Aluminum Strip]()
Precision Aluminum StripOur Precision Aluminum Strip is designed for mission-critical industrial manufacturing applications, where dimensional accuracy, mechanical consistency, and long-term supply reliability directly
-
![1100 Aluminum Strip]()
1100 Aluminum StripWe are a manufacturer specializing in precision cold-rolled aluminum strip coils used in continuous industrial production systems.
-
![Decorative Aluminum]()
Decorative AluminumWe are a professional manufacturer of decorative aluminum coil and prepainted aluminum products, specializing in continuous coil coating systems for architectural and industrial applications.
-
![1060 Aluminum Coil]()
1060 Aluminum Coil1060 Aluminum Coil is a commercially pure aluminum alloy with a minimum aluminum content of ≥99.6%, belonging to the 1xxx series aluminum family.
-
![5005 Aluminum Sheet]()
5005 Aluminum Sheet5005 Aluminum Sheet is a non-heat-treatable Al-Mg alloy (5xxx series) designed for applications requiring excellent anodizing performance, stable corrosion resistance, and consistent fabrication
-
![1060 Aluminum Sheet]()
1060 Aluminum Sheet1060 aluminum sheet is a commercially pure aluminum material with aluminum content of ≥99.6%, manufactured in accordance with GB/T 3880 and ASTM B209 standards.
-
![1050 Aluminum Sheet]()
1050 Aluminum Sheet1050 aluminum sheet is a commercially pure aluminum product with a minimum aluminum content of 99.5%. It is widely used in applications requiring corrosion resistance, good formability, and stable
-
![Aluminum Alloy 6061-T6 Round Bar]()
Aluminum Alloy 6061-T6 Round BarMaterial: 6061-T6 (Al-Mg-Si alloy). Standard: ASTM B211, AMS 4027, EN 573. Diameter Range: 3mm – 300mm (custom sizes available). Tensile Strength: 45,000 psi (310 MPa) min. Surface Finish: Smooth,
-
![ASTM B211 Aluminum Rod]()
ASTM B211 Aluminum RodMaterial Grades: 2024-T4, 6061-T6, 7075-T6 (Other alloys available upon request). Diameter Range: 5mm – 300mm (Custom sizes and tolerances supported). Certifications: Mill Test Reports (MTRs)
-
![6061 T651 ASTM B209]()
6061 T651 ASTM B209🔹 Thickness: 0.25 to 6 (6mm to 150mm). 🔹 Width: Up to 72 (1828mm). 🔹 Length: Up to 240 (6096mm). 🔹 Surface Finish: Mill finish, anodized, powder-coated. 🔹 Certifications: Mill Test Reports
-
![3003 Aluminum Alloy]()
3003 Aluminum AlloyAvailable Product Forms & Sizes. 🔹 Sheets & Plates (0.2mm - 6mm thickness). 🔹 Coils & Strips (custom widths available). 🔹 Tubes & Pipes (seamless & welded options). 🔹 Rods & Bars (round, square,
Nina Musselman
Michael Baldwin
Edward Stack
Julie Jimenez
Sandra Chea
Paul Gomez
Aluminum Bare Sheet 3003 H14 0.063" 3003-H14 Aluminum Sheet is commonly used for tanks, heat exchangers and generic sheet metal jobs. It has excellent corrosion ... Send Inquiry 3003 Drawn Aluminum...
Metal Stock, Inc. - 3003-H14. 3003-H14 aluminum is alloyed with 1.20% manganese, which increases the strength of 3003 over commercially pure aluminum (1100 series). 3003 has excellent workability ......
3003-H14 aluminum is 3003 aluminum in the H14 temper. To achieve this temper, the metal is strain hardened to a strength that is roughly halfway between annealed (O) and full-hard (H18)....
3003 H14 Aluminum Sheet. 3003 is alloyed with 1.2% maganese to provide a tensile strength range of 17 to 30 KSI. 3003 has Excellen workability, weldability, and ... Send Inquiry 3003-H14...
Aluminum Tread Plate 3003 H14 Since Aluminum alloy 3003 is named anti-rust aluminum and much stronger than alloy 1050, it is also wildly used for producing aluminum tread plate, aluminum checkered...
3003 H14 Plate Clinton. The H14 in this 3003 alloy designates its temper, and also means that partially annealed and strain hardened. This makes this metal easy to form. Another type of 3003 H14...